NorvattMini UPS & Battery Backup
English

Mini UPS · Family

LiFePO4 mini UPS

FAMILY — 2 MODELS

Lithium iron phosphate (LiFePO4) cells trade a little energy density for a much longer service life and a calmer thermal profile than standard lithium-ion — a good trade for a battery that sits plugged in, charged and warm, every day of its life. This family applies that chemistry to the mini UPS format: two models, both multi-output, both aimed at router and modem loads.

Illustration of a UPS unit with output ports and battery cells

When LiFePO4 is the right call

Choose this family when the deployment is measured in years: unattended network corners, holiday homes, remote monitoring points — anywhere a swollen or tired battery would mean a site visit. For the shortest path to a working backup at the lowest unit cost, the lithium-ion multi-output family remains the volume choice; so the two families can be compared directly.

The chemistry, in service terms

Lithium iron phosphate earns its place in a backup catalogue on two service properties: cycle life and thermal stability. A mini UPS lives a harder life than most battery products — held at full charge indefinitely, discharged whenever the grid blinks — and the chemistry that tolerates that regime longest is the one whose replacement horizon stretches furthest. The family's own data point is the 303's rating: 4,000 cycles at 15,000 mAh; the 304 carries the same chemistry to 20,000 mAh with a five-output set.

When LiFePO4 is the wrong answer

Honesty about fit cuts both ways: a site with rare, short outages and a tight budget may never live long enough with its unit to collect the chemistry's advantage, and the lithium-ion tiers will serve it well for less. The LiFePO4 premium is an investment against replacement and against deep-cycling duty; buyers whose duty is light should be quoted the plainer answer, and the inquiry that describes the duty honestly gets that plainer quote without argument.

Reading the two models apart

Between the family's two models the choice is format, not chemistry: the 303 for the standard network pair in the simpler case, the 304 for the wider output set — two 12V rails, a 9V rail, QC 3.0 USB and USB-C PD — in a wall-mountable enclosure. Both are specified the same way: device list, voltages, outage profile. The reply will place the order on the model whose format matches the installation, and say why.

Illustration of a UPS unit front panel with output ports

Optima 304 — 20,000 mAh

Five outputs including USB-C PD and QC 3.0, LiFePO4 40135 cells, wall-mountable case. Currently offered on a pre-order basis.

18W · 20,000 mAh

See the model page →

Illustration of a UPS unit

Optima 303 — 15,000 mAh

A 15,000 mAh LiFePO4 model with QC 3.0 USB and DC outputs for router and modem pairs.

15,000 mAh · QC 3.0

See the model page →

Related pages

Ask for a quotation

Tell us the model, the output voltages your equipment needs and the quantity band for your order. If you are matching a UPS to a router, camera or terminal, add the device's rated voltage and current.

Send an Inquiry