Mini UPS · Family
Online mini UPS
Some loads cannot blink: a POS printer mid-receipt, a DVR mid-write, a mini PC mid-transaction. Online models keep the load on the battery path permanently: the battery is part of the circuit, not a reserve switched in when the mains fails. The Boostra 106 platform delivers that behaviour at desktop scale, in three voltage builds up to 72W.

Three voltages, one platform
The 106 platform is built in three voltage versions — 12V 5A (60W), 19V and 24V 3A (72W). The 24V build carries 24,000 or 31,200 mAh tiers in a 137 × 124 × 44 mm case. The 12V and 19V builds are quoted per inquiry. Pick the voltage that matches the terminal's adapter first.
Online, defined by what does not happen
In an online UPS the battery never leaves the power path, so the defining event of other backups — the switchover — simply does not occur. Loads that reboot on a transfer, terminals mid-transaction, recorders mid-write: these are the online architecture's reason to exist, and this family's platform applies it to the three single-voltage classes that small equipment actually uses — 12V, 19V and 24V.
One case, three voltages
A mixed estate standardises on one platform across its voltage builds: one mounting habit, one spares shelf, one commissioning routine. Case and capacity differ between the voltage builds. The voltage decision is deferred to the order line, per site, from the device labels — the cheapest place in the whole design to make it.
Commissioning an online unit
Commissioning differs from the switched models in one respect: there is no transfer to test, so the test is the path itself — pull the mains and the load's feed does not change. That anticlimax is the product working. Installers should still record the drill's result per site, because a written record is what separates a specification question from an installation question when an outage is later blamed for a lost transaction.

Boostra 106 — 24V 3A, 72W
DC 24V input and output, 24,000 or 31,200 mAh, for POS printers and 24V equipment.


Boostra 106 — 12V 5A, 60W
The 12V build with a full 5A output for DVRs and 12V equipment with high draw.
Related pages
Ask for a quotation
Tell us the model, the output voltages your equipment needs and the quantity band for your order. If you are matching a UPS to a router, camera or terminal, add the device's rated voltage and current.