Mini UPS · Family
PoE mini UPS
A PoE camera has no power socket of its own — it is fed over the same Ethernet cable that carries its video. Backing it up therefore takes a UPS that outputs Power over Ethernet, not just DC. The Ethrx line does both: a PoE port switchable between 24V and 48V, DC outputs for the recorder or router, and a USB port — one battery feeding the camera and the network behind it together.

Matching a PoE model
Check three things on the camera or CPE label: the PoE voltage (24V passive or 48V standard), the wattage draw, and whether the link is gigabit. The Ethrx P1 carries 36W, gigabit PoE, two DC rails and QC 3.0 USB, and the sibling models vary the power class and port mix around the same idea.
Two voltage worlds, one family
Everything in this family descends from one fork: the estate's powered devices expect either 24V passive PoE or the 48V standard, and the wrong feed leaves a device dark or damaged. The family's models divide along that fork and along power class — the switchable P1 for mixed estates, the 48V P3 for standardised enterprise estates, the P2 for outdoor CPE and camera clusters, the 30W P5 for lighter cabinets, and the flexible P4 as the installer-grade all-rounder. An estate census — every powered device, with the voltage on its label — is the document that chooses among them.
Link speed is a backup specification
A PoE UPS sits inside the data path as well as the power path, so its link speed taxes every stream it carries. The family's gigabit models exist because modern camera and access-point traffic has outgrown fast Ethernet; buyers refreshing an older estate should audit the incumbent units' link speed with the same care as their voltage, because a backup upgrade is often the cheapest moment to remove a bottleneck nobody had itemised.
The cabinet is the unit of design
PoE backup is designed per cabinet, not per camera: the camera at the far end, the recorder, switch and router at the near end, all riding one battery budget. Designs that count only the far-end devices undersize every installation they touch. The inquiry that lists the whole cabinet — far end and near end, with draws — receives a configuration — and a runtime figure — for the whole cabinet.

Ethrx P1 — gigabit PoE, 36W
Selectable 24V/48V gigabit PoE, DC 12V 2A, DC 9V 2A and USB QC 3.0, in 10,400 or 20,800 mAh tiers.
Ethrx P3 — 48V gigabit PoE
A 36W model built around gigabit 48V PoE for standard-PoE cameras and access points.

Ethrx P4 — PoE + DC + USB
USB 5V, DC 9V and 12V outputs alongside switchable 24V/48V PoE — the mixed-load member of the line.
Related pages
Ask for a quotation
Tell us the model, the output voltages your equipment needs and the quantity band for your order. If you are matching a UPS to a router, camera or terminal, add the device's rated voltage and current.