Model · Step-Up Cable
Step-up cable — USB 5V to DC 12V
This booster cable converts a USB 5V supply to the DC 12V a router or modem expects, at up to 0.5A (6W). Plug one end into a USB power bank and the other into the router, and the router is fed from the power bank's battery.
Specifications — USBTO12
| Model | USBTO12 |
|---|---|
| Input | USB 5V · input current 1.5A |
| Output | DC 12V 0.5A |
| Output power (max.) | 6W |
| Protection | Overcurrent protection |
| Length | 800 mm |
| Net weight | 22.3 g |
The 22-gram backup plan
At 22.3 g the cable is the backup that lives in a drawer or a laptop bag until the evening the power goes out. It suits routers whose rated draw sits inside the cable's 12V 0.5A output — check the router's adapter rating against the 6W ceiling — and it pairs naturally with the 512A power bank or another USB bank. For always-connected automatic backup, a mini UPS remains the proper tool; the cable is the emergency bridge, priced and sized like one.
What a step-up cable can and cannot do
A step-up cable is a converter, not a battery: it draws USB 5V from whatever power bank it is plugged into and presents DC 12V at its barrel end, at its rated output, with overcurrent protection in the circuit. Its energy budget is therefore the power bank's budget, and its power ceiling is the cable's — a router whose draw sits inside the rating draws on the bank's stored energy; a load beyond the rating is not a runtime problem but a mismatch, and no bank size fixes it. That boundary is the first thing to check on the device's label.
The conversion also explains the cable's proper place in a backup plan. It is the emergency bridge — the drawer item that turns any USB power bank in the house into a router supply during an outage — and the travel item that lets one bank serve both the phone and the router in a hotel room. It is not a substitute for a purpose-built mini UPS in a permanent installation: no automatic switchover, no float charging, no protected battery of its own. Buyers equipping a fixed site should be quoted the UPS; buyers equipping a drawer, a van or a travel kit are in the right place.
Checking your devices against the 12V cable
Two label readings settle compatibility. First, the device's input: it must be a 12V DC device with the barrel size this cable carries, because a 9V device on a 12V feed can be damaged, not merely mismatched. Second, the draw: the device's rated current must sit inside the cable's output rating with something to spare, since devices draw their startup surge through the same thin path. Routers and modems in the common home class pass both tests comfortably, which is why they are the cable's application; anything with a motor, a heater or a disk should be asked about in the inquiry rather than assumed.
The source side deserves the same honesty. The cable's input current — 1.5A — is drawn from the power bank's USB port, and not every bank's port will supply it: a port limited below the cable's input draw starves the conversion and the router's input falls below its rating under load, in a way that looks exactly like a faulty cable. Test the pairing once, in comfort, before the outage does the testing — a five-minute drill that the inquiry's reply will recommend for every installation, because it converts an emergency discovery into a known quantity.
Related pages
Ask for a quotation
Tell us the model, the output voltages your equipment needs and the quantity band for your order. If you are matching a UPS to a router, camera or terminal, add the device's rated voltage and current.