Model · Multi-Output
Optima B1 — Type-C input mini UPS
The Optima B1 changes the input side of the multi-output format: instead of a DC barrel, the unit charges through USB-C, so it can share the modern USB-C supply ecosystem already powering the rest of the desk. The output side keeps the family's multi-voltage mix, and the pack is 10,400 mAh.
Specifications — Optima B1
| Model | Optima B1 |
|---|---|
| Family | Multi-output mini UPS |
| Input | USB Type-C |
| Capacity | 10,400 mAh |
Why USB-C input matters
Installations standardising on USB-C power — coworking desks, retail counters, modern home offices — can feed the B1 from the same class of adapter as their laptops and phones, with no separate DC brick to stock or lose. The backup behaviour is unchanged: the unit charges while it powers the load and feeds the load from its 10,400 mAh pack. Confirm the output voltages for the intended loads in the inquiry.
Ordering notes — Optima B1
The Type-C input is a logistics decision as much as an electrical one: sites standardised on USB-C adapters can feed this unit from the same charger stock as everything else. If your other sites run DC-adapter input models, say so in the inquiry — a mixed order is normal, and keeping the input story straight per site is what the configuration reply is for.
Why the input side is the B1's story
Every other model in this family is fed by a DC barrel input; the B1 is fed over USB-C. That single difference decides where the unit can live. A USB-C input means the backup can be charged from the same class of supply that modern laptops and monitors already use — the adapter already on the desk. Installations built around USB-C power delivery no longer need a separate barrel adapter kept with the UPS, and the cable that charges the backup is the cable the site already stocks.
The practical consequence shows up in spares and travel. A B1 kit carried between sites needs no model-specific charger; any suitable USB-C supply at the destination can refill it. For installers who maintain many small sites, that interchangeability removes a whole category of 'wrong adapter in the van' failures, and it is the reason the model exists alongside the barrel-fed 10,400 mAh A1 rather than replacing it.
Specifying the B1 correctly
The capacity matches the family's 10,400 mAh class, so the sizing conversation is the familiar one: list the loads, confirm their voltages against the output set, and size the runtime from the outage profile. The B1-specific addition is the input side of the inquiry — state what will feed it. A USB-C supply that also powers other equipment may be spoken for during an outage in ways a dedicated adapter is not, and the reply can flag that dependency when it is declared rather than discovered.
Buyers mixing B1s into a barrel-fed fleet should also say so. The units coexist happily at different sites, but a spare-pool plan has to respect the input difference: a spare B1 sent to a barrel-fed site arrives without its expected charger, and vice versa. Two lines in the inquiry about the fleet's input mix prevent the mismatch.
The B1 in installer kits
Installers who standardise on the B1 usually do so as a kit decision: the unit, its USB-C lead, and a label for the site register travel together, and the kit works at any site with a suitable USB-C supply. That portability is also why the model rewards a written register — a unit this easy to move is a unit that gets moved, and the register is what keeps its location honest.
Related pages
Ask for a quotation
Tell us the model, the output voltages your equipment needs and the quantity band for your order. If you are matching a UPS to a router, camera or terminal, add the device's rated voltage and current.