Model · Multi-Output
Optima A1 — 10,400 mAh multi-output mini UPS
The Optima A1 stretches the multi-output idea to four cells and 10,400 mAh, and adds a USB output to the DC rails — one unit that backs up a router, a modem and a USB-powered device together. It comes in two port layouts, 5912 and 51212, so the voltage mix can be matched to the equipment on the shelf.
Specifications — Optima A1
| Model | Optima A1 |
|---|---|
| Battery type | 18650 lithium-ion |
| Input | DC 12V |
| Output power (max.) | 24W |
| Outputs | USB 5V 2A · DC 9V 1A · DC 12V 1A |
| Port layouts | 5912 and 51212 versions, three output ports each |
| Capacity | 10,400 mAh (2,600 mAh × 4) · 38.48 Wh |
| Size | 116 × 73 × 24 mm |
| Net weight | 0.248 kg |
Four cells, three kinds of output
Where the three-cell models split capacity across a router and modem, the A1's 10,400 mAh pack feeds a third kind of load as well: the USB 5V 2A port covers a USB-powered camera, sensor or media box while the 9V and 12V DC rails carry the network pair. The four-cell pack stores 38.48 Wh of energy in total.
The two layouts exist because equipment pairs differ: the 5912 layout leads with the 5V/9V pairing, the 51212 layout with 5V/12V. Confirm which layout an order uses in the inquiry, with the device voltages listed, so the shipped configuration matches the shelf it will serve.
Choosing between the two A1 layouts
The A1's two port layouts — the 5912 arrangement (USB 5V, DC 9V, DC 12V) and the 51212 arrangement (USB 5V, DC 12V, DC 12V) — are the same 10,400 mAh, 24 W unit wearing two different front panels, and the choice between them is made entirely by the device list. A router-and-modem pair split across 9V and 12V takes the 5912. A pair of 12V devices — two routers, or a router and a 12V camera — takes the 51212 and uses the second 12V rail that the 5912 spends on 9V. Buyers who skip this distinction and order 'the A1' get a follow-up question, because the layout is chosen at order: the panel is the product.
The energy figure helps calibrate expectations: 38.48 Wh behind a 24 W maximum output. Runtime is that energy divided by the pair's actual draw. The A1 is therefore best understood as a long-runtime unit for ordinary network pairs, not as a small unit pretending to be a big one — buyers whose loads genuinely press against 24 W belong on the higher-capacity tiers, and the inquiry's device list is what makes that judgement possible.
Where the A1 sits in the family
Inside the multi-output family the A1 is the considered middle: more capacity than the 301's standard tiers, a USB output the 301 lacks, and a slimmer proposition than the C1's high-capacity builds. It suits the buyer whose installation is settled — the same router-and-modem set across many sites — and whose outage profile is measured in hours rather than minutes. Standardising on it across a branch network is the common pattern, with the layout choice made per branch where the modem fleet differs.
Specification highlights — Optima A1
- 10,400 mAh (38.48 Wh) four-cell 18650 pack
- USB 5V 2A plus DC 9V 1A and DC 12V 1A outputs
- Two port layouts: 5912 and 51212
- 24W maximum output in a 116 × 73 × 24 mm case
Related pages
Ask for a quotation
Tell us the model, the output voltages your equipment needs and the quantity band for your order. If you are matching a UPS to a router, camera or terminal, add the device's rated voltage and current.