NorvattMini UPS & Battery Backup
English

Model · Multi-Output

Optima C1 — high-capacity multi-output mini UPS

The Optima C1 takes the multi-output format to its largest capacities: 16,000 or 20,000 mAh behind a 27W multi-voltage output set, for buyers who like the one-unit-for-the-whole-set idea but need the runtime of the high-capacity class.

Illustration of a UPS unit and battery cells

Specifications — Optima C1

ModelOptima C1
FamilyMulti-output mini UPS
Output power (max.)27W
Capacity options16,000 mAh · 20,000 mAh

Capacity without giving up the port mix

Single-output high-capacity units buy runtime by giving up the mixed-voltage port set; the C1 keeps both. The 20,000 mAh option is the largest-capacity configuration in the multi-output family, for network corners with extended outage profiles. State the capacity option and the loads' voltages in the inquiry so the configuration is confirmed before ordering.

Ordering notes — Optima C1

Two capacities sit behind the same 27 W rating, and the choice between them is made once, at order time: the 16,000 mAh build serves the standard router-and-modem set, the 20,000 mAh build serves the same set from a larger pack. State the chosen capacity in the inquiry, with the loads' voltages and currents, so the reply quotes the build that was actually discussed. Buyers unsure which tier a site needs should send the outage profile — how long the site must ride, and how often cuts happen — and let the sizing be argued from that.

Sizing the C1 against real outage patterns

The C1's two builds exist because outage patterns, not device lists, are what separate its buyers. If your site sees frequent short cuts, compare your load's draw and the minutes you need to bridge against the 16,000 mAh build's rated capacity. If your site sees rare but long cuts — a rural install, a building whose supply is restored last — compare the same figures against the 20,000 mAh build, and keep it charged. Naming which pattern a site has is the single most useful thing an inquiry can do after listing the loads.

There is a second, quieter sizing factor: recharge between events. A battery that rode a four-hour outage needs its own hours to refill, and a grid that fails again before the refill finishes delivers a shorter second ride. Sites with clustered outages should say so; the recommendation may be the larger build, or a second unit rotated, and either answer is cheaper than discovering the pattern during the third cut of the night.

The C1 in a mixed fleet

Most C1 buyers are not buying their first unit from this range; they are adding a long-runtime tier to a fleet of standard models. The multi-output format helps here: the port logic a technician learned on the 301 or the 302 transfers directly, and only the capacity conversation changes. Fleet managers usually place the C1 by site criticality — the head-office network corner, the site whose link carries other sites' traffic — and leave the standard tiers on ordinary branches, which keeps the expensive capacity where the outage cost actually concentrates.

For the inquiry, the fleet context is worth two lines: which models the fleet already runs, and which sites the C1s are destined for. It lets the reply check the new tier against the existing device lists instead of re-asking for them, and it flags the one configuration error this model invites — ordering the 20,000 mAh build for a site whose loads were never listed, on the assumption that more capacity forgives an unchecked port plan. It does not; the ports still have to match, at any capacity.

Related pages

Ask for a quotation

Tell us the model, the output voltages your equipment needs and the quantity band for your order. If you are matching a UPS to a router, camera or terminal, add the device's rated voltage and current.

Send an Inquiry