NorvattMini UPS & Battery Backup
English

Model · PoE

Ethrx P3 — 48V gigabit PoE mini UPS

The Ethrx P3 is the 48V specialist of the PoE line: a 36W unit built around gigabit 48V Power over Ethernet, for estates standardised on 48V cameras and access points. Companion outputs for near-end gear are confirmed per order against the device list.

Illustration of a UPS unit cabled to a camera on a pole

Specifications — Ethrx P3

ModelEthrx P3
FamilyEthrx PoE mini UPS
Output power (max.)36W
PoE output48V · Gigabit

For 48V-standard estates

Where every camera and access point on a site is a 48V device, a dedicated 48V model keeps the backup design simple: one PoE feed per camera run, backed by the unit's battery. Near-end gear joins the order through the inquiry, where any companion outputs are confirmed against the device list. The 36W power class matches the P1's, so mixed P1/P3 deployments share one sizing logic — camera draw plus near-end loads against wattage and capacity.

Ordering notes — Ethrx P3

Pole and wall installations punish a wrong choice more than a shelf does, because the fix involves a ladder. Confirm the camera's voltage class and the run length before ordering; if the camera turns out to be 24V passive, the P1 covers it with the same DC rails for the rest of the cabinet. Cameras that need both PoE classes across one fleet are usually split deliberately between the two models rather than forced onto one.

Designing around a 48V-only estate

The P3 is the specialist of the PoE family: gigabit delivery at 48V, in the family's 36 W class. That suits estates that have already standardised on 48V devices — enterprise cameras, ceiling access points, the managed end of the market — where every powered device expects the same 48V feed. Sparing follows the estate: any P3 can serve any 48V run in it.

The gigabit point matters more each year. Camera resolutions and access-point throughputs have outgrown 100 Mbps links, and a backup unit inserted into the run becomes part of the link: a fast-Ethernet bottleneck inside the UPS would tax every stream it carries, in good weather as well as bad. Buyers auditing an existing estate should check the incumbent units' link speed alongside their voltage; a backup refresh is often the moment a quiet bottleneck gets found.

The P3 inquiry checklist

Three confirmations make a P3 quotation exact: that every powered device on the runs is a 48V standard device (one 24V passive camera in the estate changes the model choice), the combined wattage of the loads against the 36 W class, and the runtime the site must survive. Estates mid-migration — replacing passive devices with standard ones over a budget cycle — should say so: the right answer for this year's order may be the switchable P1, with the P3 taking over once the migration completes.

Auditing an incumbent estate before ordering

Estates arriving at the P3 usually have incumbent backup units of unknown parentage, and a half-hour audit pays for itself before any order is placed: for each incumbent, record its PoE voltage, its link speed and the loads it carries. The audit regularly finds one of two things — a fast-Ethernet unit quietly taxing a modern camera stream, or a 24V device hiding in a nominally standardised estate — and either discovery is far cheaper on paper than after installation. Send the audit with the inquiry; it is exactly the document the configuration reply is built from.

Related pages

Ask for a quotation

Tell us the model, the output voltages your equipment needs and the quantity band for your order. If you are matching a UPS to a router, camera or terminal, add the device's rated voltage and current.

Send an Inquiry